CUT-N-SEAL End Cut Wood Preservative - Sienna, 946 ml

Cut-N-Seal® is a colour-matched, brush-on wood preservative for cuts and holes in pressure treated wood that expose untreated wood in above ground applications. The copper-based, waterborne formula is low VOC and low odour. Cut-N-Seal is not to be used in preserved wood foundations, to recoat pressure treated wood surfaces, or as a replacement for pressure treatment. Not for use in Dwellings.

• Brush on two coats of Cut-N-Seal wood preservative on all cuts and holes in pressure treated wood that expose untreated wood
• For use above ground on deck boards, railing, post tops, and fence boards - Protects cut ends against rot and decay
• Copper-based, waterborne formulation
• Low VOC and low odour
• Ready to use; shake or stir before and during use
• Apply by brush; do not spray or dip.
• Apply above 10ºC; keep from freezing
• Soap and water clean-up
• Sienna/cedar colour closely matches brown pressure treated wood
• 946 ml
• **NOTE** Does not replace pressure treatment